Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 156

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 5.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3
Common Administrative Procedures
Introduction
Use these procedures to assign outside lines/trunks to the buttons on a
telephone, to copy these line/trunk assignments to additional telephones,
and to Assign System Access or Intercom buttons. These procedures can
also be used to assign additional telephone features including:
Assign Pickup Groups, Group Paging, Group Coverage, Calling Groups,
and lines/trunks assigned to calling groups and change group options
Assign or change system features such as:
Create or change labels assigned to lines/trunks, extensions and calling
groups and create or change Posted Messages or the System Speed Dial
Directory
Assign Night Service groups and options
Night Service provides after-hours coverage to extensions and calling
groups
Install a FAX machine and set options for message waiting indication
The programming procedures needed to perform these tasks are described in
detail in the remainder of the chapter. More advanced programming procedures
such as adding lines/trunks, are described in detail in
Procedures''.
Each of the procedures begins on the System Programming menu. Use one of the
methods shown below to display the System Programming menu.
At the console: Menu
At the PC or with SPM: Type
Before you begin any of the procedures in this chapter, you should read and
understand all of the information presented in
— Identifying analog multiline telephones that do not have built-in
speakerphone or Hands Free Answer on Intercom
— Identifying analog multiline telephones that require pairing of station
jacks to provide Voice Announce to Busy
— Calling Restrictions
— Transfer options
— Camp-On and Call Park return times
— Extension status
— SMDR options
— Allowed and Disallowed Lists and the telephones to which they are
assigned.
Sys Program
Exit
Press any key
spm
Chapter 1, ''Programming Basics''
June 1997
Page 3-2
Chapter 4, ''Programming
Issue 1
.

Advertisement

Table of Contents
loading

Table of Contents