Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 564

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
PRI Facilities
Console Display/Instructions
Save your entry.

Select .
Enter
Erase the current network service code.

B-Channel Group xx :
Enter Network Service
(5 digit code of 0,1)
nnnnn
Backspace
Exit
Enter the five-digit network code that corresponds to the selected service.

Dial or type [ nnnnn ].
Save your entry.

Select .
Enter
Repeat Steps 5 through 7 of the main procedure for each

miscellaneous service group number.
Return to the System Programming menu.

Select four times.
Exit
Copy Telephone Number to Send
Use this procedure to indicate whether or not the telephone number to send to the
network (for calls going out over ISDN lines assigned to a B-channel group) is
copied from the number assigned to that channel.
Select
Do Not Copy Phone Number
assigned to each channel in the B-channel group or when no telephone number is
to be sent to the network. In the latter case, make sure that no telephone numbers
are assigned to any channels in the B-channel group by using the "Telephone
Number to Send" procedure.
Additional Information
xx = group number entered in Step 5
Select Drop.
Enter
4
either when a telephone number to send is
Issue 1
June 1997
Page 4-157
PC
+
Ã