Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 762

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Print Reports
Report Language
Use this procedure to change the language of the system reports. It applies to
Release 1.1 and higher. Unless you change the report language, reports are
printed in the language chosen as the system language.
Summary: Report Language
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure More
PC Procedure
Printing System Reports
The communications system can be used to print a variety of reports. You can
print individual reports or use the
reports, including all report sections and options. See
the print reports.
Use this procedure to print the reports listed below. With the exception of Trunk
Information, the dash lists under the bullets show the sections of each report that
automatically print when the report option is selected.
All
System Set Up
System Dial Plan
System Manager
All
Not required
Form 1, System Planning
English
English, French, Spanish
No
No
Language
  
Spanish
— Each report
— All report options
— Pools
— Telephone Paging Zones
— Direct Group Calling
— Lines/Trunks
— Stations (Extensions)
4
4
Printer English

Enter Exit
or or
4
option to print the entire set of available
All
June 1997
Page 4-355
or or
French
  
Appendix F for samples of
Issue 1