Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 108

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Using SPM
Figure 2-6. SPM Help
Backup
The Backup procedure is used by qualified service personnel to create a file of
system programming information either in the \spm\backup directory (on the hard
drive of the PC) or in the root directory of a diskette (on the floppy disk drive of the
PC).
NOTE: NOTE: NOTE:
Back up your system programming information on a regular basis. A current
backup file allows you to quickly and easily restore your system, if the need
arises.
Determining the Release Number
of a Backup File
If you have a backup diskette but do not know its release number, you may be
able to find this information in the backup header. Beginning with later versions of
Release 1.1, the backup file contains a backup header 128 bytes long.
Approximately 59 of these bytes are currently used. Bytes 55 through 59 of the
2
2
Issue 1
June 1997
Page 2-24