Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 94

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Installing the SPM Software
Press any key.

Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue
Version X.XX
The screens shown in Steps 3 through 7 appear only if the system has not been
initialized. Otherwise, the screen shown in Step 8 appears.
Select the serial communications port used for SPM and press

COMM PORT:
1. Comm 1
2. Comm 2
Enter selection #
Select the communications port speed and press

Speed:
1. 1200
2. 2400
Enter selection #
Respond to the color prompt and press

COLOR
Enter selection (y/n):
Make your entry at the
X.XX = current version of SPM
Type
Type
Type
Type
Type
Type
prompt if you are using the floppy drive.
A:>
for serial port 1 (COM1).
1
for serial port 2 (COM2).
2
.
for 1200 bps.
1
for 2400 bps.
2
.
if you have a color monitor.
y
if you do not have a color monitor.
n
Issue 1
June 1997
Page 2-10
.