Delete Digits - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DID Trunks
Console Display/Instructions
Enter the number of expected digits ( n = 1 to 4).

Dial or type [ n ].
Continue to specify expected digits for the other trunk block or go to Step 9.

Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit

Delete Digits

Use this procedure to specify the number of leading digits to be deleted from the
digits sent by the local telephone company. Use this procedure when the number
of digits sent by the telephone company is greater than the number in the system
numbering plan.
Summary: Delete Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Return to Step 6. The next block will be
displayed on Line 1.
System Manager
Hybrid/PBX
Not required
Form 3d, Incoming Trunks: DID
0 digits
0 to 4 digits
No
No
LinesTrunks DID
no. Drop
Enter
digits
Enter Exit
Type trunk block no.
no. of digits
4
4
Dial trunk block
DeleteDigit
Dial no. of
Exit
Issue 1
June 1997
Page 4-134
PC
Ã
+ Type