Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 663

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
QCC Optional Features
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Queue over Threshold
Use this procedure to specify the maximum number of calls (threshold) in the
QCC queue before system operators are notified with a tone that the threshold
has been reached or exceeded. If the threshold is set to 0, operators are not
notified.
Summary: Queue over Threshold
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Elevate Priority
Use this procedure to specify the length of time before calls waiting in the QCC
queue are automatically reprioritized to a higher level. If priority is set to 0, calls
are not prioritized.
Automatic Release
Auto Hold, Auto Release
No
No
Operator Queued Call
Auto Release Enter
System Manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
0
0 to 99
No
No
Operator Queued Call
calls
Enter Exit
calls
HoldRelease
Exit Exit
or
4
4
Drop
Threshold
Exit
+ Type no. of
4
Issue 1
June 1997
Page 4-256
or
Auto Hold
Dial no. of