Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 196

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
QCC Optional Features
u
Call Type Procedure
Console Display/Instructions
Select Operator.

****
Make a selection
Priority
Operator
Exit
Specify the operator position.

**** Operator:
Enter QCC operator
extension number (0=init)
Backspace
Exit
Assign or remove the operator from the call type specified

in Step 4 of the main procedure.
Select
Enter
.
Delete
Return to the System Programming menu.

Select five times.
Exit
Delete
Enter
or
Additional Information
= option name selected in Step 4
****
= option name selected in Step 4
****
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required.
On = operator receives call type.
Flashing = operator does not receive call
type.
Off = extension is not an operator
position.
You may continue to assign or remove
QCC operators from the call type by
repeating Steps 2 and 3.
Issue 1
June 1997
Page 3-42
PC
Ã