Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 792

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
5 Centralized Telephone Programming
Program Extension
Select Start.

Extension Program
Press HOME to Exit
Sys Program
Select the line button to which you want to assign the feature.

Select Button:
Extension Program
Sys Program
Program the feature(s).

Line xxx - *
Press HOME to Exit
Sys Program
Repeat Steps 5 and 6 for each line button you want to program for the exten-

sion, or press Home to return to the Centralized Programming menu.
xxxx = extension entered in Step 2
xxxx
Start
_
xxxx = extension entered in Step 2
xxxx
Page 1
Press the line button or function key that
Page 2
corresponds to your selection.
If you are programming a telephone with
more than 20 line buttons, use
select line button 21 and above. See
Appendix E
telephones.
xxx = line selected in Step 5
*
Page 1
Page 2
Use
programming code:
OR
ListFeature
Select
List Feature
When the line button is programmed, the
system automatically returns to the screen
in Step 5.
for button diagrams of all
= current feature programmed
Table 5-1 to dial or type the
[ nnn ]
*
and see
ListFeature
Menu''.
Issue 1
June 1997
Page 5-5

Ã

to
Page 2
Ã
''Using the