Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 124

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Using SPM
If the IS II/III PC does not respond to the Pass-Thru request from the control unit
(for example, because the PC is turned off), you see the following message:
Pass-thru failed.
Please try again.
If the connection between the control unit and the IS II/III PC fails, the connection
between the control unit and the SPM PC is dropped. You see the following
message:
Pass-through Session
unexpectedly terminated.
Please press Enter
to continue.
When you press
Follow the steps below to initiate the Pass-Thru.
At the SPM Main Menu press

SPM Main Menu
Menu: Select Function
Sys Program
Backup
Boards
Print Opts
Monitor
The display area changes to 24-lines by 80-characters, which is much larger than
the display area on the console simulation window (7-lines by 24-characters).
Type your login name and press

Welcome to
IS-II/III
login:
you return to the SPM Main Menu.
to select
Maintenance
Restore
Pass-Thru
Password
Language
.
Pass-Thru
.
Issue 1
June 1997
Page 2-40