Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 638

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
Fax
Use this procedure to identify the extension jacks used to connect fax machines.
In addition, you can specify the extensions to receive a message-waiting
indication (MWI) when a fax transmission is received, and specify the length of
time before the system registers that a fax has arrived and sends the
message-waiting indication.
NOTE: NOTE: NOTE:
Do not use this procedure for fax machines connected to analog multiline
telephones with a General Purpose Adapter (GPA). In a GPA configuration,
features cannot be assigned to the fax independently of the telephone.
See Chapter 3, ''Common Administrative
procedures.
Summary: Fax
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
10 seconds
0 to 30 seconds
Yes
No
AuxEquip Fax Extension
no.
Enter Exit
Dial fax machine ext. no.
no.
Enter Threshold
seconds
Enter Exit
Type ext. no.
fax machine ext. no.
no.
4
Procedures'', for detailed programming
4
Dial ext.
Msg Waiting
Dial MWI ext.
Enter
Drop Dial no. of
Exit
Type MWI ext.
+ Type no. of seconds
Issue 1
June 1997
Page 4-231
Type