Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 369

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Night Service
PC Procedure
Procedure: Night Service with Time Set
Console Display/Instructions
Select the Night Service menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
Select Night Service option.

Night Service:
Make a selection
GroupAssign
OutRestrict
Emergency
ExcludeList
Exit
Add or Change Start Time Procedure
Erase the current start day and time ( xxxxx ) if assigned.

Night Serv Start:
Enter day(0-6), hr(00-23)
and min(00-59)
xxxxx
Backspace
Exit
Enter a one-digit day of the week (Sunday = 0, Monday = 1, and so on),

followed by a four-digit time of day ( hh = 00 to 23, mm = 00 to 59).
Dial or type [ dhhmm ].
To add or change start/stop time:
time
time
To activate/deactivate:
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
_
To add or change start time, select
Start
Start
_
Stop
_
To add or change stop time, select
Time Control
_
Stop
Cover Control
To Activate/deactivate Night Service with
Time Control, select
to
Procedure.
Press Drop.
Enter
+ Type start day and
+ Type stop day and
or
3
and go to
Add or Change Start Time Procedure.
and go to
Add or Change Stop Time Procedure.
Time Control
Activate/Deactivate Night Service
Issue 1
June 1997
Page 3-215
PC
and go
+
Ã