Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 218

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Telephones
Originate Only (Ring or Voice)
Shared (Ring or Voice)
NOTE: NOTE: NOTE:
You cannot change the factory setting for Call buttons assigned to QCC
operator positions, and you cannot assign Ring, Voice, Originate Only, or
Shared buttons to QCC operator positions. In Release 4.0 and later, the
Call 5 (Ring/Voice) button on a QCC can be programmed for Voice
Announce.
System Access or Intercom buttons can be assigned only to the first 10
buttons on a telephone.
You can assign a combination of up to 10 System Access or Intercom
buttons to each telephone (excluding QCC operator positions).
You can remove System Access or Intercom buttons, but at least one must
remain on the telephone.
Each System Access Ring or Voice on an individual telephone can be
assigned as a Shared System Access (SSA) button on up to 16 other
telephones.
Shared SA buttons cannot be assigned to single-line telephones or other
tip/ring equipment connected to an 016, 012, or 008 OPT module. Shared
SA buttons can be assigned to a tip/ring or external alert device connected
to an MFM in an MLX telephone or a GPA connect to an analog multiline
telephone. Shared SA buttons cannot be assigned when the corresponding
SA button is on a single-line set.
Release 3.0 and later
Each System Access Ring or Voice on an individual telephone can be
assigned as a Shared System Access (SSA) button on up to 27 other
telephones.
System Access and Intercom buttons are centrally programmed and cannot
be programmed by individual telephone users.
NOTE:
When single-line sets are programmed with only one System Access
or Intercom button, the Transfer, Conference and Drop features are
disabled. Other features that require a second dial tone, such as
Account Code/Number Entry, After Call Work States, Call Pickup,
Call Waiting, and Privacy, are also affected. For more information,
see the Feature Reference manual .
Issue 1
June 1997
Page 3-64