Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 424

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
System Renumbering
Summary: Select System Numbering Plan
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Select System Numbering Plan
Console Display/Instructions
Select the System Renumbering menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
Select Default Numbering.

System:
Make a selection
Default Numbering
Single
Block
Exit
System Manager
All
System idle
Form 2a, System Numbering: Extension Jacks
Two-digit
Two-digit, Three-digit, Set Up Space
No
No
SysRenumber
plan
Exit
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
If you get the System Busy message,
wait for an idle condition or exit system
programming and try again later.
4
Default Numbering
Exit
Select numbering plan
4
Issue 1
June 1997
Page 4-17
Select numbering
PC