Sub A Data; Voice Only; Voice And/Or Data Routing - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Automatic Route Selection
Console Display/Instructions
Return to the System Programming menu.

Select three times.
Exit

Voice and/or Data Routing

Use this procedure to route voice, data, or voice and data. The voice/data
specification is used mainly in conjunction with PRI. See
especially its subtopic,
Voice/data routes can be associated with Subpattern A or Subpattern B.
Summary: Voice and/or Data Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
''Outgoing Tables''.
System Manager
Hybrid/PBX
Not required
Form 3g, Automatic Route Selection Default and Special
Numbers Tables
Voice
Voice Only, Data Only, Voice/Data
No
No
More
Tables ARS
table no. and route no.
capability
Enter
no. Select capability
4
''PRI
4
or

Sub A Data

Sub B Data
Select
Enter
Exit Exit
or Type table no. and route
Issue 1
June 1997
Page 4-344
PC
Facilities'',
Dial