Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 261

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Telephone Features
Console/Display Instructions
Erase the current number of delay rings (x).

Extension xxxx :
Enter Delay Rings (0-9)
x
Backspace
Exit
Enter the number of delay rings.

Extension xxxx :
Enter Delay Rings (0-9)
x
Backspace
Exit
Save your entry.

Select
Enter
Next.
Return to the System Programming menu.

Select twice.
Exit
Trunk-to-Trunk Transfer
Use this procedure to enable or disable trunk-to-trunk transfer at an extension.
When trunk-to-trunk transfer is disabled, users cannot transfer an outside call to
an outside line.
NOTE: NOTE: NOTE:
A single-line set can never perform a trunk-to-trunk transfer.
Summary: Trunk-to-Trunk Transfer
Programmable by
Mode
Idle Condition
Next
Enter
Next
Enter
or
System Manager
All
Not required
Additional Information
xxxx = extension entered in Step 4
Press Drop or
.
Backspace
Dial or type the number of delay rings:
You may use backspace to delete
the last digit entered.
If you select to assign a forwarding
Next
delay to the next extension in a
sequence, repeat Steps 6 and 7.
3
3
Issue 1
June 1997
Page 3-107
PC
Ã