Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 864

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
D General Feature Use and Telephone Programming
Telephone Programming
Table D-4. Programming MLX Display Telephones Using the Display
Step
Label the button to be programmed.
1
Note: Skip this step if the feature will
not be programmed onto a button.
Begin programming.
2
Identify the button to be programmed.
3
To delete the feature currently
programmed on the button:
Continued on next page
Action
Remove the clear label cover from the
telephone by pulling up on the tab that
extends from the top of the cover.
Write the feature name on the card next
to the button to be programmed.
Replace the cover.
Press Menu.
Select Ext Program from the display.
Select Start from the display.
Press the button you labeled.
Note: If the feature does not get
programmed onto a button, press any
line button. This does not affect the
button in any way.
The display identifies the feature
currently programmed on the button. If no
feature is programmed, the display
indicates that the button is blank.
Select Delete from the display. The
button is now blank.
Press the button you labeled again to
continue programming.
NOTE:
If the currently programmed feature was
not deleted from the button, the new
feature programmed onto it will replace
it.
Issue 1
June 1997
Page D-15