Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 130

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Using SPM
Use the arrow keys to highlight

Make a selection for
the RESTORE file.
If upgrading, convert
files before restoring.
Press ESC to Abort.
After you press
GOTO HARD DISK
Specify the filename to restore from.

To select the default backup filename, use the arrow keys to highlight
backup.ams
If you used a different backup filename, use the arrow keys to select one of
the other filenames and press
If the file you select is not in the same format as the communications
system, the screen below appears. Press
Main Menu. See
File must be converted
before restoring.
Please press Enter
to see the main menu:
Observe the restore progress screen.

Press CTRL-F5 to Abort
Est. total time: xx min
filename
RESTORE IN PROGRESS
Blocks Sent
xxxx
To abort the restore press
GOTO FLOPPY
, the
GOTO FLOPPY
. Go to Step 5.
and press
''Convert''
Remaining
xxxx
+
and press
GOTO FLOPPY
backup.ams
file.1
file.2
statement shown above changes to
.
.
for details about converting a backup file.
xx = approximate number of minutes
filename = name entered in Step 5
xxxx = number of blocks
. You return to the SPM Main Menu.
Issue 1
June 1997
Page 2-46
.
to return to the SPM