Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 432

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
System Operator Positions
Summary: QCC Operator Positions
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
DLC Operator Positions
DLC operator positions can be assigned to the first and fifth extension jacks on
the first modules with digital or analog multiline extension jacks. A maximum of
eight DLC operator positions can be assigned. For detailed programming
procedures see
Summary: Identify or Remove DLC Operator
Positions
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
Hybrid/PBX
System idle
Form 2a, System Numbering: Extension Jacks
Type: DLC
First or fifth extension jack on MLX module (maximum: two
per module; maximum: four QCCs per system)
Yes
No
Operator Positions
no.
Enter Store All
Chapter 3, ''Common Administrative
System Manager
All
System idle
Form 2a, System Numbering: Extension Jacks
Type: DLC
First or fifth extension jack on MLX module (maximum: two
per module; maximum: eight DLCs per system)
Yes
No
Operator Positions
no.
Enter Store All
4
Queued Call
Type ext. no.
4
Procedures''.
4
Direct Line
Type ext. no.
Issue 1
June 1997
Page 4-25
Dial ext.
Dial ext.