Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 671

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Optional Group Features
Group Paging
Use this procedure to assign or remove an extension from a paging group. A
paging group consists of telephone users who hear common announcements
over the telephone speakerphone. Only MLX telephones and analog multiline
telephones with speakerphones can be members of a paging group.
A maximum of six paging groups with a maximum of 10 extensions per group is
allowed. A seventh paging group, called the Page All group, is not limited and
includes all telephones connected to the system. Extensions cannot be added to
or removed from the Page All group.
To reassign an extension to a new paging group, just assign it; the extension is
automatically removed from its old paging group.
Summary: Group Paging
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Group Coverage Member Assignments
Use this procedure to assign or remove an extension from a coverage group. A
coverage group is a group of senders. Coverage is an arrangement in which calls
from a group of senders are redirected to one or more receivers.
NOTE: NOTE: NOTE:
This procedure assigns senders . Before you begin, make certain that the
receivers for the coverage group are also programmed. Receivers can be
assigned through individual or centralized telephone programming. You
can also use the Integrated Solution III/IV feature, Integrated
Administration, to assign coverage receivers. See
Telephone Programming," for information about the appropriate centralized
programming procedure.
System Manager
All
Not required
Form 7b, Group Paging
Not applicable
Extension number
Yes
No
More
Extensions
no. Dial ext. no.
Enter
Type paging group no.
no.
4
4
Group Page Dial paging group
Enter Exit
4
Chapter
Issue 1
June 1997
Page 4-264
Exit
Type ext.
4, "Centralized