Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 674

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Optional Group Features
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Group Calling Line/Trunk or Pool Assignments
Use this procedure to assign or remove lines, trunks, or pools (Hybrid/PBX only)
that ring directly into a calling group.
Incoming calls on each line/trunk or pool can be directed to only one calling group.
To reassign a line/trunk or pool to a new calling group, you must remove it from its
old group before making the new assignment.
Summary: Group Calling Line/Trunk or Pool
Assignments
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Optional Group Calling Features
This section includes programming summaries for the following optional group
calling features:
Hunt Type
Extension numbers
Yes
No
More
Extensions
group ext. no.
Enter
no.
Enter Exit
Type ext. no.
System Manager
All
Not required
Form 7d, Group Calling
Not applicable
Line, trunk, or pool number
Yes
No
More
Extensions
calling group ext. no.
no.
Enter Exit
no. Type line/trunk no.
Grp Calling Members
Dial ext.
Exit Exit
Type calling group ext. no.
4
4
Grp Calling Line/Pool
Dial line/trunk
Enter
Exit Exit
Type calling group ext.
4
Issue 1
June 1997
Page 4-267
Dial calling
Dial