Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 471

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Lines and Trunks
Console/Display Instructions
Enter the slot number of the module to contain the tertiary system clock.

Tertiary System Clock
Enter slot number (1-17)
xx
Backspace
Exit
Save your entry.

Select .
Enter
Specify whether the clock is to be synchronized to an external

endpoint (loop) or is to be free running (local), then go to Step 21.
Tertry ClkSource Slot xx :
Select one
Loop
_
Local
Exit
Select the port on the 800 NI-BRI module to be the tertiary clock source.

Tertiary LoopClk Slot xx :
Enter port number (1-8)
x
Backspace
Exit
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit
Additional Information
Delete
Dial or type [ xx ].
Enter
If the slot selected in Step 17 contains a
100D module, continue with Step 19.
If the slot selected in Step 17 contains an
800 NI-BRI, go to Step 20.
xx = slot number entered in Step 5
Select
Local
Enter
Dial or type [ x ].
Enter
or
Loop
.
Issue 1
June 1997
Page 4-64
PC
Ã
Ã