Add Digits - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DID Trunks
Console Display/Instructions
Erase the current number of delete digits ( n ).

DID Block x :
Enter number of digits
to delete (0-4)
n
Backspace
Exit
Enter the number of digits to delete ( n = 0 to 4).

Dial or type [ n ].
Continue to specify delete digits for the other trunk block or go to Step 9.

Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select two times.
Exit

Add Digits

Use this procedure to specify the number of leading digits that must be added to
the digits sent by the local telephone company. Use this procedure when the
number of digits sent by the telephone company is fewer than the number in the
system numbering plan.
Summary: Add Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Additional Information
x = block entered in Step 4
Next
Enter
Press Drop.
System Manager
Hybrid/PBX
Not required
Form 3d, Incoming Trunks: DID
0
1 to 9999
No
Return to Step 6. The next block will be
displayed on Line 1.
4
4
Issue 1
June 1997
Page 4-136
PC
+
Ã