Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 89

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Installing the SPM Software
appears on the screen.
A:>
Insert the backup copy of the SPM diskette into Drive A.

Type one of the commands shown below and press

Because English is the default language,
the same result. If you do use the language argument (
, you must type it in lowercase letters as shown. The command
spanish)
may be uppercase or lowercase.
Wait for the message shown below to appear.

SPM HARD DISK INSTALLATION PROGRAM
Strike a key when ready
Press any key to begin the installation.

When the installation is finished, the following message appears:
SPM HARD DISK INSTALLATION IS NOW COMPLETE
YOU MUST REBOOT YOUR SYSTEM BEFORE USING SPM
Remove the SPM diskette from Drive A and reboot your system.

The installation procedure is complete. Go to "Initializing the SPM Software."
DOS Installation with Windows 95
Using DOS SPM with Windows 95 improves the interaction of SPM with the
operating system as compared to Windows 3.x installation. For example, the
interaction with the print driver is improved. If an online printer is not available
when you try to print while using SPM, you see a message box explaining the
problem. You can correct the problem by bringing the printer on-line and
continuing, or you can cancel the print operation. SPM operation is not affected by
the error message or the action you take to correct the problem.
Use the following procedure to install SPM. You do not need to remove the
current SPM files. The new files automatically overwrite your current SPM files.
Considerations
Review the following items before you begin the installation procedure.
The installation program automatically performs the following:
install
install french
install spanish
.
and
install install english
english
2
2
Issue 1
June 1997
Page 2-5
have
, , or
french
install