Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 658

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
Delayed Call Forwarding
Delayed Call Forwarding allows users to answer or screen a call arriving at their
extension before the call is forwarded through Call Forwarding, Remote Call
Forwarding, or Follow Me. The forwarding delay is the amount of time between
the arrival of the call at an extension and the time the call is forwarded. This delay
is measured in rings and can range from 0 to 9 rings. With the delay ring set to 0,
the call is forwarded immediately. Delayed Call Forwarding is only available in
Release 4.0 and later.
NOTE: NOTE: NOTE:
When Do Not Disturb is activated at an extension it overrides Delayed Call
Forwarding and the call is forwarded immediately.
Use this procedure to assign or remove Delayed Call Forwarding from an
extension. If you are assigning Delayed Call Forwarding to a group of sequential
extensions, begin programming the lowest extension number to take advantage of
the screen key (see "Standard Procedures").
Next
Summary: Delayed Call Forwarding
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Station
Data Form 1b, 7500B Data Station
0 rings
0 - 9 rings
Yes
No
More
Extensions
no. Dial no. of delay rings
Enter
Type ext. no.
rings
4
4
Dial ext.
Delay Frwd
Enter
Type no. of delay
Issue 1
June 1997
Page 4-251
Exit Exit