Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 546

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DID Trunks
Signaling
Use this procedure to specify whether the type of dialing signal from the local
telephone company is touch-tone or rotary. Touch-tone dial mode cannot be
programmed for immediate-start DID trunks.
Touch-tone single-line telephone users cannot make calls by using individual
trunks programmed for rotary operation. The touch-tone signals generated from
the telephone while dialing are transmitted to the central office at the same time
the rotary signals are sent to the system. The central office receives both signals
and cannot process the call.
Summary: Signaling
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Signaling
Console Display/Instructions
Select the Lines and Trunks menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
System Manager
Hybrid/PBX
Not Required
Form 3d, Incoming Trunks: DID
Rotary
Rotary, Touch-tone
No
No
LinesTrunks
no.
Enter
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
4
4
DID Signaling
or
Rotary TouchTone
Type trunk block no.
4
Issue 1
June 1997
Page 4-139
Dial trunk block
Enter Exit Exit
or
PC