Channel Service Unit - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DS1 Facilities
Console/Display Instructions
Save your entry.

Select .
Enter
Select Line Compensation.

DS1 Slot xx :
Make a selection
Type
FrameFormat
Suppression
Signaling
Exit
Erase the current line compensation value ( n ).

Line Comp DS1 Slot xx :
Enter line compensation
value (1-5)
n
Backspace
Exit
Enter a value for the line compensation ( n = 1 to 5).

Dial or type [ n ].
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit

Channel Service Unit

Use this procedure to specify the type of equipment provided by the local
telephone company as foreign exchange or special access.
NOTE: NOTE: NOTE:
You do not need to use this procedure unless your system emulates
loop-start or ground-start with the T1 type of DS1 facility.
Additional Information
xx = slot number entered in Step 3
Line Comp
_
ChannelUnit
xx = slot number entered in Step 3
Press Drop.
Enter
4
Issue 1
June 1997
Page 4-102
PC
+
Ã