Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 697

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
System Features
Console Procedure
PC Procedure
Assign Allowed Lists to Telephones
Use this procedure to assign individual telephones access to established Allowed
Lists. More than one Allowed List can be assigned to a telephone.
Summary: Assign Allowed Lists to Telephones
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Disallowed Lists
Use this procedure to establish Disallowed Lists. These lists are telephone
numbers that cannot be dialed from specified telephones (including unrestricted
telephones).
A maximum of 8 lists (numbered 0 through 7) with 10 entries each (numbered 0
through 9) are allowed. Each number can have a maximum of 11 digits, including
wildcards. The Pause character (entered by pressing the Hold button) is used to
designate a wildcard character, for example, to indicate that calls to a given
exchange are restricted in every area code.
!
SecurityAlert:
Create a Disallowed List or use the pre-prepared Disallowed List number 7
(Release 3.1 and later systems only) to disallow dialing 0, 11, 10, 1700,
1809, 1900, and 976 or 1(wildcard)976. In Release 3.1 and later systems,
Disallowed List number 7 does not include 800 and 1800 and 411 and 1411,
but Lucent Technologies recommends that you add them. Assign all voice
mail port extensions to this Disallowed List. Lucent Technologies
Tables AllowList
no. Drop
Enter
Type list no. and entry no.
Type no.
System Manager
All
Not required
Form 6g, Call Restriction Assignments and Lists
Not applicable
0 to 7
Yes
Yes
Tables AllowTo
no.
Enter Exit
Type list no.
no.
Dial list no. and entry
Dial no.
Enter
4
4
Dial list no.
Enter
Exit
Type ext.
4
Issue 1
June 1997
Page 4-290
Exit
+
Dial ext.