Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 33

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
1 Programming Basics
Programming Procedures
Table 1-2 contains details on the use of the screen keys.
Table 1-2.
Display
BackSpace
Enter
Delete
Next
Exit
Screen Keys
Key Function
or Change your entry. Select
you press the key, the screen cursor moves
backward to erase one character at a time.
or Save your entry. Typically, you select
save the information. Occasionally, you must select
Exit (
screen after you use Enter. If the entry is not valid,
the system may beep and/or display an error
message and does not save the entry.
Delete a current entry. Select
PC) to delete (or remove) a current entry.
Program sequentially numbered items. If you are
programming a group of sequentially numbered
extensions, lines, or trunks, you may have the option
to select
and automatically provides the number of the next
extension or trunk in the sequence. Typically, you
remain at the same screen until you select Next. In
a few cases, you may return to an earlier screen in
the procedure.
Return to the previous screen. Select
on the PC) when you complete a procedure, to move
up one screen in the menu hierarchy.
provides a reference to the entire System
Programming menu hierarchy.)
Exit a screen without changes. In most cases, you
select
without making any changes. Exceptions are noted
as part of a procedure.
Complete a procedure. In a few cases, you return
to the System Programming menu when you select
Exit
step within the procedure. You can then select one
of the options shown on the screen and continue
programming, or you can continue to use Exit until
you return to the System Programming menu.
on the PC) to correct your entry. Each time
on the PC) to complete a procedure and
on the PC) and return to a previous
( on the PC). This saves your entry
Next
( on the PC) to exit from a screen
Exit
. In most cases, you return to an intermediate
Issue 1
June 1997
Page 1-19
( or
Backspace
(
Enter
( on the
Delete
(
Exit
(Appendix B
or