No Delay - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Group Calling Features
Group Calling Delay Announcements
Use this procedure to designate the announcement devices used to play
messages to callers while they are waiting in the queue.
As of Release 5.0, 10 primary and one secondary announcement devices can be
designated for each calling group; however, more than one calling group can use
the same announcement device. The extensions to which the delay
announcement devices are connected should not be programmed as calling
group members.
If the extension jack or MFM was previously programmed as a regular extension,
you must remove all line/trunk button assignments before you designate the
extension jack as a delay announcement device.
Summary: Group Calling Delay Announcements
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Group Calling Delay Announcements
Console Display/Instructions
Select the Extensions menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
System Manager
All
Not required
Form 7d, Group Calling
No delay announcement devices are assigned
Primary Announcements, Secondary Announcement
Yes (for primary announcements)
No
Extensions
calling group ext. no.
or
Secondary Announcement
Announcent device
no.
device
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
3
3
More
Grp Calling
Enter Primary Announcements
Enter Extension number of
Enter Exit
Type calling group ext.
or Type ext. no. of announcement
3
Issue 1
June 1997
Page 3-133
Dial
DelayAnnce
Exit Exit
PC