Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 222

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Telephones
.
Table 3-2. Programming Codes for Assigning SA/ICOM Ring and Voice Buttons
Use
To assign System Access
or Intercom Ring button
To assign System Access
or Intercom Voice button
To assign System Access
or Intercom Originate Only
- Ring button
To assign System Access
or Intercom Originate Only
- Voice button
To assign Shared System
Access button
To change current
assignment for System
Access or Intercom Voice,
Originate Only or Shared
System Access buttons
from Voice to Ring
Console Display/Instructions
Specify an extension.

Centralized Programming:
Enter extension
Backspace
Exit
On the Console
Dial
*16
, press button
Dial
*16
being programmed
again, and dia
Dial
*18
Dial , press button
*18
being programmed
again, and dial
Dial press the
*17,
extension number of
principal telephone
[nnnn] then press the
button number being
shared [nn]
Dial
**19
SP: "Entering an Extension"
Enter
On the PC
Type
Type *16
function key for button
being programmed
l *19
again, and type
Type
Type
function key for button
being programmed
*19
again, and type
Type
extension number of
principal telephone
[nnnn] then press the
button number of
specific button being
shared [nn]
Type
Additional Information
June 1997
Page 3-68
*16
, press
+
*19
*18
press +
*18,
*19
, press the
*17
**19
Issue 1
PC
Ã