Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 724

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Automatic Route Selection
Console Display/Instructions
Specify whether 1+7-digit dialing is required within the home area code.

1+7 Digit Dialing:
Select one
Within Area Code
Not within Area Code
Exit
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit
ARS Tables
Use this procedure for the following tasks:
To specify type of table (6-digit, area code, exchange,
or 1 + 7-digit number)
To add or change area codes to be included in each table
To add or change exchanges to be included in each table
A maximum of 16 tables can be established, numbered 1 through 16. Each table
can have a maximum of 100 entries, numbered 1 through 100. Tables 17 and 18,
the Default Toll and Default Local tables respectively, cannot be changed.
The first entry in a 6-digit table must be the area code. Subsequent entries consist
of exchanges within that area code.
Area code tables can contain only area codes.
Exchange and 1 + 7-digit tables can contain only exchanges.
The wildcard character (Pause) cannot be used to enter area codes or exchanges
in ARS tables.
Summary: ARS Tables
Programmable by. System Manager
Mode
Idle Condition
Additional Information
Select
Not within Area Code
Enter
Hybrid/PBX
Not required
or
Within Area Code
.
4
4
Issue 1
June 1997
Page 4-317
PC