Mode Of Operation - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Basic System Operating Conditions
Console/Display Instructions
Select Board Renumbering.

System:
Make a selection
Restart
SProg Port
Mode
Board Renum
Exit
Respond to the prompt.

Board Renumber:
System will be down ....
Do you want to continue?
Yes
No
Exit
Board Renumber:
System is Renumbering

Mode of Operation

The system mode Key, Behind Switch, or Hybrid/PBX determines how the
system operates and directly affects the following operations:
How lines and/or trunks are provided to users
Types of operator consoles allowed
Features available
Changing this option causes a system restart and terminates the programming
session. You must enter system programming again to program other features.
NOTE: NOTE: NOTE:
The Hybrid/PBX option is not available if the control unit processor module
has been modified to operate in Permanent Key mode only. See the
Equipment and Operations Reference.
Additional Information
MaintenBusy
Date
Time
Back/Restore
To continue the Board Renumbering
procedure, select
information screen appears.
To terminate this procedure and return to the
System menu select
Exit
When renumbering completes,
the system returns to the
screen shown in Step 1.
. The renumbering
Yes
, then select
No
.
4
Issue 1
June 1997
Page 4-7
PC