Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 567

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
PRI Facilities
Console Display/Instructions
Continue to assign the copy option to another B-channel group or go to

Step 9.
Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select three times.
Exit
Incoming Routing
Use this procedure to specify whether incoming routing is either by line
appearance or according to dial plan. Dial Plan Routing is available in Hybrid/PBX
mode only.
Summary: Incoming Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Return to Step 7. The next group will be
displayed on Line 1.
System Manager
Line appearance: Hybrid/PBX, Key; Dial Plan Routing:
Hybrid/PBX only
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Line appearance
Dial Plan Routing, Routing by Line Appearance
No
No
LinesTrunks PRI
B-channel group no.
routing
Enter Exit
no. Specify method of
routing
4
4
B-ChannlGrp Incoming Rtg
Specify method of
Enter
Exit Exit
Type B-channel group
Issue 1
June 1997
Page 4-160
PC
Dial