Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 754

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Night Service
For detailed information see
Night Service Group Assignment
Use this procedure to assign extensions and calling groups to a Night Service
group for coverage after hours.
A maximum of eight Night Service groups can be assigned (no more than one for
each operator position assigned). Any number of extensions can be assigned to a
Night Service group, and an extension can belong to more than one group.
A calling group can also be assigned to a Night Service group. This applies only to
Release 2.0 or later.
Beginning with Release 4.1 this option allows the system manager to assign
outside lines to Night Service groups in addition to extensions and calling groups
for coverage after hours.
Any number of outside lines can be assigned to a Night Service group. Each
outside line can belong to more than one group.
Summary: Night Service Group Assignment
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To assign a calling group to a Night Service group:
Chapter 3, ''Common Administrative
System Manager
All
Not required
Form 9a, Night Service: Group Assignment
Not applicable
Not applicable
No
No
NightSrvce GroupAssign
no. of Night Service attendant
no.
Enter Exit
To assign an extension to a Night Service group:
NightSrvce GroupAssign
Night Service attendant
telephone
Enter
To assign an outside line to a Night Service group:
NightSrvce GroupAssign
no. of Night Service attendant
number (801-880)
4
4
Calling Group
Enter
Exit
Extensions
Dial ext. no. of
Enter
Exit Exit
Extensions
Enter
Enter Exit Exit
Issue 1
June 1997
Page 4-347
Procedures''.
Dial ext.
Dial calling group
Dial ext. no. of
Dial ext.
Dial outside line