Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 221

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Telephones
Console Display/Instructions
Select Centralized Telephone Programming.

System Programming:
Make a selection
Labeling
Data
Print
Cntr-Prg
_
Exit
Select an extension option.

Centralized Programming:
Make a selection
Program Ext
_
Copy Ext
_
Exit
Program Extensions Procedure
Although you can make selections from the screen (with the
to assign Ring and Voice buttons, the following procedure provides the
programming codes to perform these functions. Using the codes speeds the
button assignment process.
When you enter the programming code for assigning a Ring button, the screen in
Step 6 of the following procedure changes to the first List Feature screen, then
returns to the screen shown in Step 6.
Table 3-2
You can handle errors in data entry as follows:
If you enter a feature code incorrectly while programming, the display
shows the
button flashes. If this happens, press the button again and repeat the
procedure.
If you make a mistake and program the wrong feature on a button, press
the button, select
Language
provides the programming codes for assigning Ring and Voice buttons.
Programming Error
Delete
Additional Information
Select
Program Ext
Program Extensions Procedure.
Select and go to
Copy Ext
Copy Extension Procedure.
message and the red LED next to the
( on the PC), and press the button again
and go to
ListFeature
Issue 1
June 1997
Page 3-67
PC
option)