Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 107

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Using SPM
Table 2-3.
SPM Menu
Option
Sys Program
Backup*
Boards*
Print Opts*
Monitor*
Maintenance
Restore*
Pass-Thru
Password*
Language
1. SPM option only. Not available on the MLX-20L system programming console. To be
used only by qualified service personnel.
SPM Help
To access the SPM help screens, press
To review the help screens press,
To return to the first help screen, press
To exit from SPM help, press
A typical help screen is shown in
SPM Main Menu Options
Function
To program the system
To make a backup copy of your system programming and store
it on diskette or on hard disk
Shows which modules (port boards) are in each slot of the
control unit and allows you to assign boards to slots
Directs reports to the printer or to the PC for storage on diskette
or hard disk
Restricted to use by your technical support organization
Restricted to use by your technical support organization and
qualified technicians
To restore your system programming from diskette or hard disk
1
(IS II/III only) To make a remote connection, through the control
unit, to an IS II/III PC to administer applications on the IS II/III
PC.
To change the password for remote entry into the system.
To select a language (English, French, or Spanish) for the
console simulation window on the PC. (There is also a
Language option available on the System Programming menu
that allows you to set the system language.)
2
+ .
and .
.
.
Figure 2-6.
Issue 1
June 1997
Page 2-23