Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 219

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Telephones
Summary: Assign Intercom or System Access
Buttons
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
System Manager
All, but note differences in factory settings.
Telephone idle
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjuncts: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct (DLC)
Data Form 1a, Modem Data Station
Data Form 1b, 7500B Data Station
Key Mode. An Intercom Ring (ICOM Ring), an Intercom
Voice (ICOM Voice), and the first eight lines connected to the
system are assigned to all analog multiline and MLX
telephones, excluding operator positions. Two Intercom Ring
buttons are assigned to tip/ring equipment connected on an
012 or 016 module. An Intercom Ring and an Intercom
Originate Only (ICOM Orig Only) button are assigned to
tip/ring equipment connected by an MFM. No outside lines
are assigned.
Behind Switch Mode. An Intercom Ring, an Intercom Voice,
and a prime line button are assigned to all analog multiline
and MLX telephones, excluding operator positions. Two
Intercom Ring buttons and a prime line button are assigned
to tip/ring equipment connected to an 012 module. An
Intercom Ring and an Intercom Originate Only Ring button
are assigned to tip/ring equipment connected by an MFM. No
outside lines are assigned.
Hybrid/PBX Mode. System Access Ring (SA Ring), System
Access Voice (SA Voice), and System Access Originate
Only Ring (SA Orig Only) buttons are assigned to all analog
multiline and MLX telephones, excluding operator positions.
Two System Access Ring buttons and a System Access
Originate Only Ring button are assigned to tip/ring equipment
(for example, single-line telephones or fax machines
connected to an 012 module). No personal line or pool
buttons are assigned.
All Modes. System Access Ring (Hybrid/PBX mode) or
Intercom Ring (Key and Behind Switch modes), System
Access Voice (Hybrid/PBX mode) or Intercom Voice (Key
and Behind Switch modes), and the first 18 through 29 lines
connected to the control unit are assigned to all DLC operator
3
Issue 1
June 1997
Page 3-65