Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 27

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
1 Programming Basics
Programming Procedures
Data Voice/Data
Enter voice/data pair
7108
Backspace
Exit
Figure 1-8. Inspect Example
After you enter and save
sequential extension jack number. This extension jack pair does not appear on
the data entry screen; however, if you press Inspct (
appears, as shown on the sample Inspect screen in
Voice/Data Pairs:
7108 7109
Exit
Figure 1-9. Sample Inspect Screen
Whenever you want to return to the previous screen, select
The Inspect feature also allows you to check a value currently programmed for a
feature. This is helpful when you are changing or modifying features. You can also
use it when you program sequential extensions or lines to verify the last number
programmed. See the Feature Reference for details about the Inspect feature.
Using the Programming Procedures
This section contains specific information about how to make the best use of the
programming procedures. Make certain that you read and understand the
information presented here before you begin any system programming
procedures.
>
Delete
Enter
, the system automatically assigns the next
7108
>
Selected Option
Prompt
Extension entered
Figure
Inspect data displayed
1
Issue 1
June 1997
Page 1-13
on the PC), the pair
1-9.
( on the PC).
Exit