Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 497

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DS1 Facilities
Œ
Dial Mode Procedure
Console/Display Instructions
Choose an option.

All S56 Data:
Select **mode
Rotary
_
Touch Tone
_
Exit
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select four times.
Exit
Switched 56 Dial Plan Routing
Dial plan routing provides a way to route incoming calls received on a Switched 56
Network line. An incoming call is routed by matching the incoming number and
then optionally deleting and/or adding digits to direct the call to a specific
endpoint. The expected digits are the number of incoming digits outpulsed from
the central office.
Summary: Switched 56 Dial Plan Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To specify Expected Digits:
Additional Information
**
Select
Next
Touch Tone
Enter
System Manager
Hybrid/PBX
100D module idle
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
D4 compatible
D4, ESF
No
No
LinesTrunks
Routing Expected Digits
digits
Enter
= In or Out
or
Rotary
4
4
T1 Data NW
More
Drop
Exit Exit Exit
Issue 1
June 1997
Page 4-90
PC
S56 Dial Plan
Dial expected