Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 355

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
System Features
Console/Display Instructions
Assign or remove the extension from the allowed list.

Select
Enter
Delete
Continue to assign extensions to the next allowed list or go to Step 8.

Select
Next.
Return to the System Programming menu.

Select two times.
Exit
Disallowed Lists
Use this procedure to establish Disallowed Lists. These lists are telephone
numbers that cannot be dialed from specified telephones (including unrestricted
telephones).
A maximum of eight lists (numbered 0 through 7), with 10 entries each (numbered
0 through 9) is allowed. Each number can have a maximum of 11 digits, including
wildcards. The Pause character (entered by pressing the Hold button) is used to
designate a wildcard character, for example, to indicate that calls to a given
exchange are restricted in every area code.
!
SecurityAlert:
or
.
Create a Disallowed List or use the pre-prepared Disallowed List
number 7 (Release 3.1 and later systems only) to disallow dialing 0,
11, 10, 1700, 1809, 1900, and 976 or 1(wildcard)976. In Release 3.1
and later systems, Disallowed List number 7 does not include 800
and 1800 and 411 and 1411, but Lucent recommends that you add
them. Assign all voice mail port extensions to this Disallowed
List. Lucent recommends assigning Disallowed List number 7.
This is an added layer of security, in case outward restriction is
inadvertently removed. (In Release 3.1 and later systems, voice
messaging ports are assigned by default to Disallowed List
number 7.)
Additional Information
You may continue to assign or remove the
allowed list from additional extensions by repeat-
ing Steps 5 and 6.
Return to Step 5. The next allowed list will be dis-
played on Line 1.
3
Issue 1
June 1997
Page 3-201
PC