Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 265

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Telephone Features
Console/Display Instructions
Specify the extension.

HotLine Extensions:
Enter extensions
Backspace
Exit
Assign or remove HotLine from the extension entered in Step 4.

Select
Enter
Delete
Return to the System Programming menu.

Select twice.
Exit
Primary Cover Ring Delay
The Primary Cover Ring Delay option replaces the Delay Ring Interval
programmed on a systemwide basis in releases prior to Release 4.1.
Use this procedure to specify the following:
The delay before a Primary Cover button programmed for Delay Ring
begins to ring audibly
The delay in addition to the Group Coverage Ring Delay before sending
calls to Group Coverage when the sender has Primary or Secondary
Coverage and any receiver is available
The Primary Cover Ring Delay is programmed for each sender's extension.
Summary: Primary Cover Ring Delay
Programmable by
Mode
Idle Condition
Planning Form
Delete
Enter
to allow HotLine operation or
to disallow HotLine operation.
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 6.
On = HotLine is enabled.
Off = HotLine is disabled.
You may continue to assign or remove
HotLine operation from additional exten-
sions by repeating Steps 4 and 5.
3
3
Issue 1
June 1997
Page 3-111
PC
Ã