Ldspkr Pg; Loudspeaker Paging - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones

Loudspeaker Paging

Use this procedure to identify the line/trunk jack reserved for connection of
loudspeaker paging equipment.
NOTES:
1. If you use equipment that rebroadcasts music or other copyrighted
2. A maximum of three single-zone or multizone loudspeaker paging
3. You cannot assign the line/trunk identified for loudspeaker paging
4. You cannot assign the line/trunk identified for loudspeaker paging
Summary: Loudspeaker Paging
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
materials, you may be required to obtain a copyright license from and
pay license fees to a third party (such as ASCAP or BMI). Magic on
Hold requires no such license and can be purchased from your Lucent
Technologies dealer.
systems can be connected to the system.
equipment use to a line/trunk pool. If the line/trunk is currently assigned
to a pool, you must remove it before you program this option.
equipment use as a Remote Access line/trunk, and you cannot use its
jack for Music on Hold or maintenance alarm.
System Manager
All, but in Hybrid/PBX mode the line/trunk designated for
loudspeaker paging cannot be assigned to a line/trunk pool.
Line/trunk idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk numbers
Yes
No
AuxEquip
4
4
Dial line/trunk no.

Ldspkr Pg

Type line/trunk no.
Issue 1
June 1997
Page 4-229
Enter Exit