Other Digits - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Automatic Route Selection
Console Display/Instructions
Enter the number of digits to be absorbed ( nn = 1 to 11).

Dial or type [ nn ].
Continue to enter absorbed digits for another route number for

Subpattern B or go to Step 6.
Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit

Other Digits

Use this procedure to specify other (extra) digits that must be added by the
system to the beginning of the number dialed by the caller, when calls are placed
on an identified route.
NOTE: NOTE: NOTE:
Pool routes must be programmed before you assign other digits.
A maximum of 20 digits can be added, in any combination of the digits 0
through 9.
Special characters such as switchhook flash, Stop, and # cannot be
included as extra digits. Pause is allowed in every position but the first.
Other digits are assigned to Tables 1 through 18.
Summary: Other Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Additional Information
Return to Step 3. The next route number
will be displayed on Line 1.
System Manager
Hybrid/PBX
Not required
Form 3f, Automatic Route Selection Tables
0
4
4
Issue 1
June 1997
Page 4-334
PC
Ã