Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 415

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Basic System Operating Conditions
The following options cannot be programmed for Behind Switch or Key systems:
Automatic Route Selection (ARS)
Pools
Queued Call Consoles (QCCs) and associated features
Direct Inward Dialing (DID) Trunks
System Access buttons
Dial Plan Routing (PRI)
Call by Call Services (PRI)
The Ground-Start lines/trunks option cannot be programmed if the processor
module has been modified for Permanent Key mode operation only.
Summary: Mode of Operation
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Mode of Operation
Console Display/Instructions
Select the System menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
System Manager
All
System idle
Form 1, System Planning
Hybrid/PBX
Key, Behind Switch, Hybrid/PBX
No
No
System Mode
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
4
Select mode
Enter
Select mode
4
Issue 1
June 1997
Page 4-8
PC