Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 633

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
Busy feature. Calls cannot be placed to the extension jack reserved for the Voice
Announce to Busy feature.
Voice Announce to Busy must be disabled at data stations.
NOTE: NOTE: NOTE:
This procedure does not apply to MLX telephones (Voice Announce to
Busy is automatically provided) and cannot be programmed for single-line
telephones.
Summary: Analog Multiline Telephones with
Voice Announce to Busy
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Analog Multiline Telephones in Data Stations
See ''Data
Auxiliary Equipment
The procedures in this section describe the steps needed to perform the following:
Identify the line/trunk jacks used for Music on Hold, loudspeaker paging,
and maintenance alarms
Identify the extension jacks used for fax, MERLIN MAIL, Voice Messaging
System, Automated Attendant, and AUDIX Voice Power
System Manager
All
System idle
Form 4b, Analog Multiline Telephone
Form 5a, Direct-Line Console (DLC)
Analog Data Form 1a, Modem Data Station
Not applicable
Extension numbers
Yes
Yes
Extensions
no.
Enter
Features''.
4
Dial ext.
VoiceSignl
Exit Exit
Type ext. no.
4
4
Issue 1
June 1997
Page 4-226