Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 681

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Optional Group Features
Group Calling External Alert for
Calls-In-Queue Alarm
Use this procedure to designate the external alert device used to notify calling
group members when the number of calls in the queue reaches programmed
Threshold 3.
Only one external alert device can be designated for each calling group. Since the
external alert signal is continuous, it is recommended that only light-type external
alert devices be designated for the Calls-in-Queue alarm.
Summary: Group Calling External Alert for
Calls-In-Queue Alarm
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Group Type
Use this procedure to determine whether or not the system automatically logs in
members of a calling group after a power failure. This setting also determines the
type of voice messaging interface when the calling group is used to connect voice
messaging or automated attendant applications. The settings are listed below.
Automatic Log Out. Used for calling groups to specify that the system
does not automatically log in calling group members after a power failure.
Calling group members must manually log themselves into the group.
Automatic Log In. Used for calling groups that consist of fax machines or
data stations (also called data hunt groups) to specify that the system
automatically logs in calling group members after a power failure. This
setting can also be used for calling groups consisting of telephones.
System Manager
All
Not required
Form 7d, Group Calling
Not applicable
Extension number
No
No
More
Extensions
calling group ext. no.
alert
Enter Exit
no. +
alert
4
4
Grp Calling Xtnl Alert
Drop Dial ext. no. for
Enter
Exit
Type calling group ext.
Type ext. no. for
4
Issue 1
June 1997
Page 4-274
Dial