Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 694

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
System Features
This setting does not affect calls received on DID trunks if you have specified that
calls to unassigned DID extensions are to receive a fast busy signal. See "Invalid
Destination."
Summary: Redirect Outside Calls to Unassigned
Extension Numbers
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To select QCC queue:
PC Procedure
Host System Dial Codes for Behind Switch Mode
Use this procedure to assign the host system dial codes for the
Transfer,Conference, and Drop features.
When multiline telephone users press the Transfer, Conference, or Drop button,
a signal is sent to the host service and the communications system features are
not accessed. Assigning dial codes to these features ensures that users can take
advantage of them through the host system.
NOTE: NOTE: NOTE:
This procedure applies to Behind Switch mode only.
System Manager
All
Not required
Form 8a, System Features
Extension number of primary operator
QCC queue extension number, other extension number
No
No
More
Options Unassigned
To select extension or calling group:
More
Options Unassigned
Dial ext. no. or group no.
Calling Enter
To select QCC queue:
To select extension or calling group:
no.
4
QCC Queue
Extension
or Type ext. no. or group
4
Issue 1
June 1997
Page 4-287
Enter Exit
or
Grp
Enter Exit