Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 847

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
C LED Displays
LED Status
Table C-1. Line or Trunk Feature Status
System
Programming
Menu
Option
Option
Lines Trunks Tie Lines
Inmode
Outmode
Dialtone
Lines Trunks TT/LS Disc
Outmode
Lines Trunks Pools
Lines Trunks Toll Type
Lines Trunks Hold Disconct
Lines Trunks LS-ID Delay
Extensions Lines Trunks
*
LED Status is indicated on LEDs next to the 20 buttons below the display area of the system programming console
or simulated on the computer screen when using SPM.
†
This is the factory setting.
Green LED
ON OFF
Incoming tie Incoming tie
line is line is rotary
touch-tone dial†
Outgoing tie Outgoing tie
line is line is rotary
touch-tone dial†
Remote dial Local dial tone
tone†
Line/Trunk is Line/trunk is
touch-tone† rotary dial
Must dial 1 + 1 + dialing is
area code† not needed
Long-450 ms† Short- 50 ms
LS-ID Delay is LS-ID Delay is
on off†
Line/trunk or Line/trunk or
pool is pool is not
assigned to assigned to
button button
LED Status*
FLASHING ON
Trunk is in pool Trunk is not in
Trunk is
assigned to a
pool
Issue 1
June 1997
Page C-2
Red LED
OFF FLASHING
pool