Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 648

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
System Not in Hybrid/PBX Mode
CTI Link Extensions:
Extension xxxx Failed.
System Not in
Hybrid/PBX Mode.
Exit
This message appears if the communications system is not in Hybrid/PBX mode.
CTI Links cannot be used with communications systems operating in Key mode or
Behind Switch mode.
Not on MLX Port Module
CTI Link Extensions:
Extension xxxx Failed.
Not on MLX Port Module.
Exit
This message appears if you have chosen an extension that is not on an MLX
Port Module. CTI Link extensions cannot be programmed on tip/ring or analog
multiline telephone module ports. You must chose an extension that is on an MLX
port module (008 MLX or 408 MLX).
Extension Selected is System Programming Port
CTI Link Extensions:
Extension xxxx Failed.
Extension Selected is
System Programming Port.
Exit
This message appears if you have chosen an extension that has been
programmed as a system programming port, which is not permitted as the CTI link
port. You must choose another port for the CTI Link extension.
NOTE: NOTE: NOTE:
You should choose a module other than the one that has the system
programming port so that you can still perform maintenance and system
programming when the board with the CTI Link extension is busied-out.
Issue 1
June 1997
Page 4-241
4
4
4